Direkt zum Inhalt

glossar_laser_scan_technik_scanpedia

Glossary

SCANpedia - Willkommen im Lexikon der SCANLAB GmbH

Sie finden hier Erklärungen und Definitionen zu den wichtigsten Fachbegriffen aus dem Bereich der Optik, Scanner-Technologie, Lasertechnologie und -bearbeitung.

Sollten Sie einzelne Termini in unserer Enzyklopädie vermissen – schicken Sie uns gerne eine E-Mail.

Use tags to classify products

R

Rayleigh length

The distance to the beam waist, until the beam diameter is increased by a factor of √2.

Unit: mm

M2 = Beam quality (laser-dependent)
k = Correction factor, depends on A and D (ideally 1.27; more typically between 1.5 and 2.0)
A = Aperture of the scan system
D = Beam diameter prior to focusing (typically 6 – 70 mm)
λ = Wavelength (typically 193 nm – 10.6 μm)
f = Focal length (typically 30 mm – 2,000 mm)

Repeatability

Repeatability describes the precision of multiple moves to the same point within a short time period (from a few milliseconds up to five minutes).

During repeated moves to a position within a short time period (from a few milliseconds up to five minutes), deviations will occur between the repetitions. For a warmed-up system (warm-up: 30 minutes) with steady ambient temperature and operational conditions, the imprecision's standard deviation (RMS ) lies within the specified range. Here, it is assumed that dither averages out.

Systems with digital encoders have clearly superior repeatability .

RMS

The Root Mean Square is identical to the standard deviation sigma if it fluctuates around 0. Here it is used synonymous with sigma.

© SCANLAB GmbH, Alle Rechte vorbehalten

Siemensstr. 2a82178 PuchheimTel. +49 89 800746-0E-Mail senden